Vendor: Reptilia
Type: Lighting Accessories
Price: 107.96

Introducing the TORCH™ 18350 Light Body with Integral M-LOK® Mount. Machined from aircraft grade billet aluminum with Milspec Type III Hardcoat Anodized finish, the TORCH is optimized for use with the ATPIAL/PEQ 15, NGAL, and other top-mounted aiming laser devices. Featuring an integral uni-body M-LOK interface it is not only low profile, but provides the most robust M-LOK weapon light mounting solution on the market today.

Available immediately in both left and right hand variants, the TORCH 18350 is compatible with Modlite Systems bezels and tail caps as well as Surefire KE2-DF bezel and tail caps and pressure switch caps. The TORCH 18350 is available in MIL-STD Type III, Class 2, hard anodize, black, Tobacco, and Clear.

Like all Reptilia products, the TORCH-18350 is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Vendor: Reptilia
Type: Lighting Accessories
Price: 116.96

Introducing the TORCH™ 6V/2xCR123 Light Body with Integral M-LOK® Mount. Machined from aircraft grade billet aluminum with Milspec Type III Hardcoat Anodized finish, the TORCH is optimized for use with the ATPIAL/PEQ 15, NGAL, and other top-mounted aiming laser devices. Featuring an integral uni-body M-LOK interface it is not only low profile, but provides the most robust M-LOK weapon light mounting solution on the market today.

Available immediately in both left and right hand variants, the TORCH-6v/2xCR123 is compatible with Surefire SCOUT M600 light bezels, tail caps and pressure switch caps. The TORCH 6v/2xCR123 is available in MIL-STD Type III, Class 2, hard anodize, Black, and Clear.

Like all Reptilia products, the TORCH-6v/CR123 is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Vendor: Reptilia
Type: Lighting Accessories
Price: 107.96

Introducing the TORCH™ Light Body with Integral M-LOK® Mount. Machined from aircraft grade billet aluminum with Milspec Type III Hardcoat Anodized finish, the TORCH is optimized for use with the ATPIAL/PEQ 15, NGAL, and other top-mounted aiming laser devices. Featuring an integral uni-body M-LOK interface it is not only low profile, but provides the most robust M-LOK weapon light mounting solution on the market today. Available immediately in both left and right hand variants, the TORCH 3V/CR123 is compatible with SureFire® M300 Scout bezels and tail caps. 6V/CR123 versions coming soon.

The TORCH 3V is immediately available in MIL-STD Type III, Class 2, black and contract over-run Tobacco.

Vendor: Reptilia
Type: Optic Mounts
Price: 98.96

The 1.93 inch height DOT Mount™ for HOLOSUN® AEMS™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics.  Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail.  Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.

Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Compatible with:

Holosun – AEMS®

Vendor: Reptilia
Type: Optic Mounts
Price: 98.96

The 1.93 DOT Mount™ for Holosun HE509T by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics.  Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail.  Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.

Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.  Additional heights and optic configurations coming soon!

Compatible with:

Holosun® Technologies –  HS509T

Holosun®/Primary Arms – HE509-RD ACSS Vulcan Reticle

Vendor: Reptilia
Type: Optic Mounts
Price: 85.46

The 1.93″ TRIJICON MRO Mount by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.

Like all Reptilia products, the TRIJICON MRO mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. Additional heights and optic configurations coming soon!

Vendor: Reptilia
Type: Optic Mounts
Price: 98.96

The 1.93 DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics.  Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail.  Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.

Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.  Additional heights and optic configurations coming soon!

Compatible with:

Aimpoint® – Micro R-1, H-1, H-2, T-1, T-2, CompM5
Sig Sauer® – ROMEO4 , ROMEO5 & ROMEO-MSR
Vortex Optics® – Crossfire®, Spitfire®, Sparc® I & II
Primary Arms® – Classic Series Gen II, SLx Advanced Rotary Knob Microdot, & SLx Compact 1×20 Prism Scope – ACSS-Cyclops
Holosun® Technologies –  HS403(not HS403A), HE403, HS503, HE503, HS515, HE515,  & HE530.

Vendor: Reptilia
Type: Optic Mounts
Price: 85.46

The DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics.  Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the DOT Mount attaches to any M1913 Picatinny rail, and offers lower 1/3 co-witness with standard AR15-style back-up sights.  Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.

Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.  Additional heights and optic configurations coming soon!

Compatible with:

Aimpoint® – Micro R-1, H-1, H-2, T-1, T-2, CompM5
Sig Sauer® – ROMEO4 , ROMEO5 & ROMEO-MSR
Vortex Optics® – Crossfire®, Spitfire®, Sparc® I & II
Primary Arms® – Classic Series Gen II, SLx Advanced Rotary Knob Microdot, & SLx Compact 1×20 Prism Scope – ACSS-Cyclops
Holosun® Technologies –  HS403(not HS403A), HE403, HS503, HE503, HS515, HE515,  & HE530.

Vendor: Reptilia
Type: Optic Mounts
Price: 292.46

Introducing the AUS Mount for 34mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.

The AUS is compatible with all of our existing 34mm ROF line, and will be compatible with several new ROF products launching over the coming months.

Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.  Additional heights and optic configurations coming soon!

Vendor: Reptilia
Type: Optic Mounts
Price: 292.46

Introducing the AUS Mount for 30mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.

The AUS is compatible with all of our existing 30mm ROF line, and will be compatible with several new ROF products launching over the coming months.

Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.  Additional heights and optic configurations coming soon!

Vendor: Reptilia
Type: Sling Mounts
Price: 44.96

Introducing the Socket™ Mount M-LOK® QD attachment point, from Reptilia. Driven by the request of an end user group, for an anti-snag, low profile, streamline M-LOK attachment.

The Socket mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.

Like all Reptilia products, the M-LOK® QD Sling Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Vendor: Reptilia
Type: Stocks + Accessories
Price: 31.46

Vendor: GBRS Group
Type: Optic Mounts
Price: 325.00

MAY TAKE AN ADDITIONAL 1-3 DAYS TO SHIP

HYDRA is the first dual optic mount designed for end-users that offers a 2.91” Optic Centerline for faster target ID, regardless of gear/ equipment obstructions, ie. EarPro/Comms headsets, Gas masks/ CBRN, and Night vision use. A higher Optic allows for a more athletic posture and “Heads up” attitude that enables the end-users to maintain a vertical spine which translates to body armor or “presenting plates” to the threat. This “Heads up” style allows for faster processing speed and increased situational awareness.

The unique and patented design offers two separate elevated MIL-STD-1913 rail or Picatinny platforms for direct attachment of optics and aiming devices. It’s perfect for the super short PDW/SMG platforms where rail space is limited but the need for mounting a light and laser is still critical. The pass-through on the neck allows for cable management or iron sight passthrough.

There is no longer a need to compromise your grip because of equipment or have to relocate your hands because of limited rail space. We achieve this by elevating the light or laser off the Picatinny and closer to the red dot optic. This alleviates obscuration and brings the weight to the center of the platform over the magazine well.

Although specifically designed for the EOTECH EXPS Series, the mount is also compatible with other optic brands that have MIL-STD-1913 rail/ Picatinny attachments. MADE IN THE USA

Vendor: Unity Tactical
Type: Helmet Accessories
Price: 81.00

Yielding a more than 25% weight reduction from currently fielded NVG shrouds, the SUMMIT™ Three-Hole Shroud provides a superior strength-to-weight ratio. It secures night vision electro-optics, lights, cameras and other accessories with a proven fit that is sturdy and reliable. With an over-molded unibody construction, the SUMMIT™ shroud is durable in even the most austere environments, featuring a high-impact polymer shroud and a fixed over-molded stainless steel insert.

Available in five FED-STD colors for retrofit of ArmorSource™, Avon Protection™ Ceradyne, Busch PROtective®, Galvion™, MTEK™, Ops-Core® and many other global helmet brands utilizing the standard three-hole pattern. Hardware for various helmet types included (see details in Description below).

COMPATIBILITY:

Most helmet shells utilizing a standard three-hole pattern, including but not limited to: ArmorSource™, Avon Protection™ Ceradyne (Bolted Models), Busch PROtective®, Galvion™, MTEK™, Ops-Core® and others

WEIGHT:

OZ: <0.95
G: <27

MATERIAL:

Shroud: High-Impact Polymer
Insert: Machined Stainless Steel

DIMENSIONS (WxH):

IN: 4.2 X 3.84
CM: 10.67 X 9.75

COLORS:

Black (FED-STD-595C #37030)
Cam Green (FED-STD-595C #34094)
Coyote Brown (FED-STD-595C #20150)
Desert Tan (FED-STD-595C #33446)
Foliage Green (FED-STD-595C #34160)

INCLUDED HARDWARE:

Three (3) 4-40 x 5/16″ Cap Screws
Three (3) 4-40 x 1/2″ Cap Screws
Three (3) 4-40 x 5/8″ Cap Screws
Three (3) #4 Washers
Three (3) Shroud Nuts
One (1) T8 Torx Wrench

Vendor: GBRS Group
Type: Optic Mounts
Price: 349.99

HYDRA is the first dual optic mount designed for end-users that offers a 2.91” Optic Centerline for faster target ID, regardless of gear/ equipment obstructions, ie. EarPro/Comms headsets, Gas masks/ CBRN, and Night vision use. A higher Optic allows for a more athletic posture and “Heads up” attitude that enables the end-users to maintain a vertical spine which translates to body armor or “presenting plates” to the threat. This “Heads up” style allows for faster processing speed and increased situational awareness.

The unique and patented design offers an elevated MIL-STD-1913, or Picatinny platform for directly attaching accessories such as lights, optics, and aiming devices. It’s perfect for the super short PDW/SMG platforms where rail space is limited but the need for mounting a light and laser is still critical. The pass-through on the neck allows for cable management or iron sight passthrough. 

There is no longer a need to compromise your grip because of equipment or have to relocate your hands because of limited rail space. We achieve this by elevating accessories like the light or laser off the Picatinny and closer to the red dot optic. This alleviates obscuration and brings the weight to the center of the platform over the magazine well. 

Although specifically designed for the Aimpoint Micro Red Dot Sight T1 and T2 models, the mount is also compatible with other optic brands (i.e. Sig Sauer®, Holosun®, Primary Arms®, and Vortex Optics®) that have the same 4-Hole footprint as the Aimpoint T1/T2/Comp M5. MADE IN THE USA